QUALITY MANAGEMENT SYSTEM
|
|
Isover products are manufactured according to ISO 9001:2008.
|
FEATURES & BENEFITS
|
- Lightweight & easy to handle
- Exceptional acoustic properties
- Good thermal resistance values
- Safe application & use
- Will not sag when correctly installed
- Offers improved light reflection
- Suitable for use in areas of high relative humidity (up to 95% RH)
- Zero ozone depleting potential(ODP)
|
FIRE PROPERTIES
|
- Non combustible base board - tested to SANS 10177 Part 5
- SANS 10400 Part T 4.13.1 (A)
- Thickness of facing material is less than 0.5 mm and fully adhered to a non-combustible
sub straight and thus considered non-combustible
|
THERMAL PROPERTIES
|
|
Contributes to indoor comfort and contributes to life long savings by reducing heat
loss/gain due to the inherent thermal insulation properties.
|
ACOUSTIC PROPERTIES
|
|
Offers exceptional acoustic properties & enhances indoor environmental quality
by absorption of noise. Reduces sound transmission to and from a room or building.
|
APPLICATIONS
|
|
Domestic, commercial & industrial suspended ceilings.
|
DURABILITY
|
- Odourless, inert & fully compatible with all standard building materials & components
- Will not promote corrosion of steel, copper or aluminium - Will not sustain vermin
- Will not breed or promote fungi, mould or bacteria.
- Non-hygroscopic
- Dust settlement will not hamper the products performance
|
PHYSICAL PROPERTIES (Click on Image to enlarge)
|
|
TOOLS NEEDED FOR INSTALLATION
|
|
Soundlite panels are designed to fit standard grid systems. Hold down clips are
provided to secure ceiling tiles in the grid system. A sharp knife/blade to be used
for trimming/sizing of panels.
|
INSTALLATION INSTRUCTIONS & PRECAUTIONS
|
- Soundlite acoustical ceiling tiles are laid in a suspended ceiling grid system and,
where instructed by the architect, secured by means of hold down clips as supplied
by Isover.
- The contractor is to take care when installing the tiles to ensure that the facings
are kept free from dust and grime, finger-marks or any other possible blemish or
damage.
- No damaged tiles are to be installed and extreme care is to be taken when further
work is carried out on the ceiling (e.g. installation of the light fittings).
- Any light fitting, fan or any other fixture is to be independently secured by whatever
means required and should not rest on the ceiling tile so as not to put any pressure
on the tile whatsoever
- The ceiling grid is to be laid out as per the manufacturer’s instructions.
|
HANDLING & STORAGE
|
|
Store product undercover, and in dry conditions. Store flat. Handle with care, especially
on the edges and corners, which can be damaged if subject to sharp or heavy impact.
Do not apply excessive pressure, for example by standing or sitting on the product,
as permanent damage may be caused.
|
ARCHITECTURAL SPECIFICATION
|
|
Install (25/40)mm thick "Soundlite" acoustic suspended ceiling tiles in
(Coral/Ripple) vinyl facing complete with T sections, hangers, hold down clips etc.
Installation strictly in accordance with manufacturer's detail & specification. |
Isover reserves the right to alter or amend product specification without notice.
The information given in this publication is correct to the best of our knowledge
at the time of publication. Whilst Isover will endeavour to ensure publications
are up to date, it is the users’ responsibility to check with us that it is correct
prior to use.
|