© 2009 - Isover - All rights reserved

FACTORYBOARD

Factoryboard is a rigid board manufactured from non-combustible Glasswool insulation. Available in 25, 40 or 50 mm thick. It can be supplied with an ASTM E-84 tested reinforced foil or white metalized foil. Alternative facings are also available (black metalized foil, white embossed vinyl or black non-woven glass tissue).

QUALITY MANAGEMENT SYSTEM
Isover products are manufactured according to ISO 9001:2008.
FEATURES & BENEFITS
Life long energy savings
  • Excellent thermal & acoustic properties
  • Maintenance free
  • Long product life - will not readily age
  • Significantly reduces heat loss/gains
  • Made to size to reduce wastage
  • Zero ozone depleting potential(ODP)
THERMAL PROPERTIES
Contributes to indoor comfort and life long savings by reducing heat loss/gain due to the inherent thermal insulation properties.
FIRE PROPERTIES
Foil:
  • Class 1 fire index rating - tested to SANS 10177 Part 3
  • Class A1, s1, do according to EN-13823
  • EUROCLASS A2 - EN 13501-1
  • Tested to ASTM E-84
    • Flame Spread Index: 10
    • Smoke Development Index: 0
WMF:
  • Tested to ASTM E-84
    • Flame Spread Index: 20
    • Smoke Development Index: 15
ACOUSTIC PROPERTIES
Offers exceptional acoustic properties & enhances indoor environmental quality by absorption of noise.
APPLICATIONS
  • Multi-purpose wall cladding:
    • Use 80 kg/m3 density
    • Recommended to be installed in a grid system.
  • Over purlin roof insulation for new buildings or in a supporting grid system for existing buildings
    • Use 80 kg/m3 density in horizontal applications
  • Should not be installed in applications where the facing material is exposed to direct or indirect Ultraviolet radiation
DURABILITY
  • Odourless, inert and fully compatible with all standard building materials & components
  • Will not promote corrosion of steel, copper or aluminium
  • Will not sustain vermin
  • Will not breed or promote fungi, mould or bacteria.
  • Non-hygroscopic
  • Dust settlement will not hamper the products performance
PHYSICAL PROPERTIES (Click on Image to enlarge)
FactoryBoard
TOOLS NEEDED FOR INSTALLATION
Boards are manufactured to length – a sharp knife will be required should cutting be necessary.
INSTALLATION INSTRUCTIONS
Take care when installing in windy conditions.
  1. When installing over purlins, a C clip/metal saddle must be inserted through the board so that the roof sheet clip is fixed to the structure and not to the board.
  2. Use H sections or T sections to span between the purlins to support the board along the longitudinal joint. Minimum recommended face width of T or H section - 35 mm.
  3. For retro-fit roof insulation installations, it is recommended that Factoryboard be installed as a ceiling in a standard suspended grid system.
HANDLING & STORAGE
Store product undercover, and in dry conditions. Store flat. Handle with care, especially on the edges and corners, which can be damaged if subject to sharp or heavy impact. Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.
ARCHITECTURAL SPECIFICATION
Install (25/40/50)mm thick, rigid “Factoryboard” as an aesthetic, acoustic and thermal (wall cladding/suspended ceiling/over purlin roof insulation). Density 80 kg/m3 faced with (reinforced foil/white metalized foil/black metalized foil/white embossed vinyl/black non-woven glass tissue). Install as per manufacturer’s specifications.

Isover reserves the right to alter or amend product specification without notice. The information given in this publication is correct to the best of our knowledge at the time of publication. Whilst Isover will endeavour to ensure publications are up to date, it is the users’ responsibility to check with us that it is correct prior to use.